Debian

# 
assemble:
  # 
  deb:
    # Assemblers require a name.
    # 
    app:

      # Enables or disables the assembler.
      # Supported values are [`NEVER`, `ALWAYS`, `RELEASE`, `SNAPSHOT`].
      # Defaults to `NEVER`.
      #  
      active: ALWAYS

      # Export the assembled artifacts as a matching named distribution.
      # Defaults to `true`.
      # 
      exported: true

      # The stereotype of this assembler.
      # Supported values are [`NONE`, `CLI`, `DESKTOP`, `WEB`, `MOBILE`].
      # Defaults to `#{project.stereotype}`.
      # 
      stereotype: CLI

      # Additional properties used when evaluating templates.
      #  
      extraProperties:
        # Key will be capitalized and prefixed with `deb`, i.e, `debFoo`.
        foo: bar

      # 
      platform:
        # Key value pairs.
        # Keys match a full platform or an os.name, os.arch.
        # Same rules apply as in Platform.
        # 
        replacements:
          osx-x86_64: mac
          aarch_64: aarch64
          x86_64: amd64
          linux_musl: alpine

      # Name of the executable launcher.
      # If left undefined, will use `#{assembler.name}`.
      # 
      executable: app

      # Target architexture.
      # Valid values as defined by `dpkg-architecture -L` such as `all`, `aamd64`, etc.
      # 
      architecture: all

      # Target path where files will be installed.
      #  
      installationPath: '/opt/{{packageName}}'

      # References assembled artifacts from another assembler.
      # 
      assemblerRef: 'app-archive'

      # Defines values for control fields
      # See https://www.debian.org/doc/debian-policy/ch-controlfields.html
      # 
      control:

        # Name of the package.
        # Defaults to `#{assembler.name}`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-package
        # 
        packageName: app

        # Package version.
        # Defaults to `#{project.version}`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-version
        # 
        packageVersion: 1.0.0

        # Package revision.
        # Defaults to `#{project.version}`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-version
        # 
        packageRevision: 1

        # Virtual package name.
        # Defaults to `#{assembler.name}`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#package-interrelationship-fields-depends-pre-depends-recommends-suggests-breaks-conflicts-provides-replaces-enhances
        # 
        provides: app

        # The package maintainer’s name and email address.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-maintainer
        # 
        maintainer: Duke <duke@acme.com>

        # Specifies an application area into which the package has been classified.
        # Defaults to `misc`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#section
        # 
        section: devel

        # How important it is that the user have the package installed.
        # Defaults to `optional`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#priority
        # 
        priority: optional

        # Is it an essential (non-removable) package or not.
        # Defaults to `false`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#essential
        # 
        essential: true

        # The package's description.
        # Defaults to `#{project.longDescription}`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#description
        # 
        description: Sample application

        # The URL of the web site for this package.
        # Defaults to `#{project.links.website}`.
        # https://www.debian.org/doc/debian-policy/ch-controlfields.html#homepage
        # 
        homepage: https://github.com/duke/app

        # Additional source packages used to build the binary.
        # https://www.debian.org/doc/debian-policy/ch-relationships.html#s-built-using
        # 
        builtUsing: 'gcc-4.6 (= 4.6.0-11)'

        # Dependencies may be defined as a list of packages
        # https://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
        # 
        depends:
          - foo
        preDepends:
          - bar
        recommends:
          - foobar
        suggests:
          - foobar
        enhances:
          - foofy
        breaks:
          - foofoo
        conflicts:
          - barbar

      # Directory with file templates used to prepare the assembler.
      # Defaults to `src/jreleaser/assemblers/#{distribution.name}/deb`.
      # If specified, path must exist.
      # 
      templateDirectory: path/to/deb/templates

      # List of template files to be skipped.
      # Value may be an exact match or a regex.
      # 
      skipTemplates:
        - README.md.tpl

      # Defines a list of additional files as artifacts.
      # These files will be added to the assembled archive.
      #  
      artifacts:
        - path: path/to/file
        - path: path/to/another_file
          transform: path/inside/archive
        - path: path/to/platform/specific/file
          platform: osx-x86_64

      # Defines a list of additional files as globs.
      # These files will be added to the assembled archive.
      # 
      files:
          # The pattern to use.
          # May use glob or regex pattern syntax.
          #  
        - pattern: path/to/**/*.txt

      # 
      fileSets:
          # The input directory to copy files from.
          #  
        - input: path/to/input/directory

          # The target path inside the archive.
          # If left undefined, defaults to the root of the archive.
          #  
          output: path/to/archive/entry

          # Fail if the given `input` does not exist.
          # Defaults to `true`.
          # 
          failOnMissingInput: false

          # A set of files and directory to include.
          #  
          includes:
            - 'name_or_regex'

          # A set of files and directory to exclude.
          #  
          excludes:
            - 'name_or_regex'

          # Additional properties used when evaluating templates.
          #  
          extraProperties:
            # Key will be capitalized and prefixed with `artifact`, i.e, `artifactFoo`.
            foo: bar

# Assemblers require a name.
# 
[assemble.deb.app]

  # Enables or disables the assembler.
  # Supported values are [`NEVER`, `ALWAYS`, `RELEASE`, `SNAPSHOT`].
  # Defaults to `NEVER`.
  #  
  active = "ALWAYS"

  # Export the assembled artifacts as a matching named distribution.
  # Defaults to `true`.
  # 
  exported = true

  # The stereotype of this assembler.
  # Supported values are [`NONE`, `CLI`, `DESKTOP`, `WEB`, `MOBILE`].
  # Defaults to `#{project.stereotype}`.
  # 
  stereotype = "CLI"

  # Additional properties used when evaluating templates.
  #  
  extraProperties.foo = "bar"
  # Key will be capitalized and prefixed with `deb`, i.e, `debFoo`.

  # Key value pairs.
  # Keys match a full platform or an os.name, os.arch.
  # Same rules apply as in Platform.
  # 
  [assemble.deb.app.platform.replacements]
    osx-x86_64 = "mac"
    aarch_64 = "aarch64"
    x86_64 = "amd64"
    linux_musl = "alpine"

  # Name of the executable launcher.
  # If left undefined, will use `#{assembler.name}`.
  # 
  executable = "app"

  # Target architexture.
  # Valid values as defined by `dpkg-architecture -L` such as `all`, `aamd64`, etc.
  # 
  architecture = "all"

  # Target path where files will be installed.
  #  
  installationPath = "/opt/{{packageName}}"

  # References assembled artifacts from another assembler.
  # 
  assemblerRef = "app-archive"

  # Defines values for control fields
  # See https://www.debian.org/doc/debian-policy/ch-controlfields.html

  # Name of the package.
  # Defaults to `#{assembler.name}`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-package
  # 
  control.packageName = "app"

  # Package version.
  # Defaults to `#{project.version}`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-version
  # 
  control.packageVersion = "1.0.0"

  # Package revision.
  # Defaults to `#{project.version}`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-version
  # 
  control.packageRevision = 1

  # Virtual package name.
  # Defaults to `#{assembler.name}`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#package-interrelationship-fields-depends-pre-depends-recommends-suggests-breaks-conflicts-provides-replaces-enhances
  # 
  control.provides = "app"

  # The package maintainer’s name and email address.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-maintainer
  # 
  control.maintainer = "Duke <duke@acme.com>"

  # Specifies an application area into which the package has been classified.
  # Defaults to `misc`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#section
  # 
  control.section = "devel"

  # How important it is that the user have the package installed.
  # Defaults to `optional`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#priority
  # 
  control.priority = "optional"

  # Is it an essential (non-removable) package or not.
  # Defaults to `false`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#essential
  # 
  control.essential = true

  # The package's description.
  # Defaults to `#{project.longDescription}`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#description
  # 
  control.description = "Sample application"

  # The URL of the web site for this package.
  # Defaults to `#{project.links.website}`.
  # https://www.debian.org/doc/debian-policy/ch-controlfields.html#homepage
  # 
  control.homepage = "https://github.com/duke/app"

  # Additional source packages used to build the binary.
  # https://www.debian.org/doc/debian-policy/ch-relationships.html#s-built-using
  # 
  control.builtUsing = "gcc-4.6 (= 4.6.0-11)"

  # Dependencies may be defined as a list of packages
  # https://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
  # 
  control.depends = ["foo"]
  control.preDepends = ["bar"]
  control.recommends = ["foobar"]
  control.suggests = ["foobar"]
  control.enhances = ["foofy"]
  control.breaks = ["foofoo"]
  control.conflicts = ["barbar"]

  # Directory with file templates used to prepare the assembler.
  # Defaults to `src/jreleaser/assemblers/#{distribution.name}/deb`.
  # If specified, path must exist.
  # 
  templateDirectory = "path/to/deb/templates"

  # List of template files to be skipped.
  # Value may be an exact match or a regex.
  # 
  skipTemplates = [ "README.md.tpl" ]

  # Defines a list of additional files as artifacts.
  # These files will be added to the assembled archive.
  #  
  [[assemble.deb.app.artifacts]]
    path = "path/to/file"
  [[assemble.deb.app.artifacts]]
    path = "path/to/another_file"
    transform = "path/inside/archive"
  [[assemble.deb.app.artifacts]]
    path = "path/to/platform/specific/file"
    platform = "osx-x86_64"

  # Defines a list of additional files as globs.
  # These files will be added to the assembled archive.
  # 
  [[assemble.deb.app.files]]
    # The pattern to use.
    # May use glob or regex pattern syntax.
    #  
    pattern = "path/to/**/*.txt"

  # 
  [[assemble.deb.app.fileSets]]
    # The input directory to copy files from.
    #  
    input = "path/to/input/directory"

    # The target path inside the archive.
    # If left undefined, defaults to the root of the archive.
    #  
    output = "path/to/archive/entry"

    # Fail if the given `input` does not exist.
    # Defaults to `true`.
    # 
    failOnMissingInput = false

    # A set of files and directory to include.
    #  
    includes = ["name_or_regex"]

    # A set of files and directory to exclude.
    #  
    excludes = ["name_or_regex"]

    # Additional properties used when evaluating templates.
    #  
    [[assemble.deb.app.fileSets.extraProperties]]
      # Key will be capitalized and prefixed with `artifact`, i.e, `artifactFoo`.
      foo: bar

{
  // 
  "assemble": {
    // 
    "deb": {
      // Assemblers require a name.
      // 
      "app": {

        // Enables or disables the assembler.
        // Supported values are [`NEVER`, `ALWAYS`, `RELEASE`, `SNAPSHOT`].
        // Defaults to `NEVER`.
        //  
        "active": "ALWAYS",

        // Export the assembled artifacts as a matching named distribution.
        // Defaults to `true`.
        // 
        "exported": true,

        // The stereotype of this assembler.
        // Supported values are [`NONE`, `CLI`, `DESKTOP`, `WEB`, `MOBILE`].
        // Defaults to `#{project.stereotype}`.
        // 
        "stereotype": "CLI",

        // Additional properties used when evaluating templates.
        //  
        "extraProperties": {
          // Key will be capitalized and prefixed with `deb`, i.e, `debFoo`.
          "foo": "bar"
        },

        // 
        platform: {
          // Key value pairs.
          // Keys match a full platform or an os.name, os.arch.
          // Same rules apply as in Platform.
          // 
          "replacements": {
            "osx-x86_64": "mac",
            "aarch_64": "aarch64",
            "x86_64": "amd64",
            "linux_musl": "alpine"
          }
        },

        // Name of the executable launcher.
        // If left undefined, will use `#{assembler.name}`.
        // 
        "executable": "app",

        // Target architexture.
        // Valid values as defined by `dpkg-architecture -L` such as `all`, `aamd64`, etc.
        // 
        "architecture": "all",

        // Target path where files will be installed.
        //  
        "installationPath": "/opt/{{packageName}}",

        // References assembled artifacts from another assembler.
        // 
        "assemblerRef": "app-archive",

        // Defines values for control fields
        // See https://www.debian.org/doc/debian-policy/ch-controlfields.html
        // 
        "control": {

          // Name of the package.
          // Defaults to `//{assembler.name}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-package
          // 
          "packageName": "app",

          // Package version.
          // Defaults to `//{project.version}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-version
          // 
          "packageVersion": "1.0.0",

          // Package revision.
          // Defaults to `//{project.version}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-version
          // 
          "packageRevision": "1",

          // Virtual package name.
          // Defaults to `//{assembler.name}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//package-interrelationship-fields-depends-pre-depends-recommends-suggests-breaks-conflicts-provides-replaces-enhances
          // 
          "provides": "app",

          // The package maintainer’s name and email address.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-maintainer
          // 
          "maintainer": "Duke <duke@acme.com>",

          // Specifies an application area into which the package has been classified.
          // Defaults to `misc`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//section
          // 
          "section": "devel",

          // How important it is that the user have the package installed.
          // Defaults to `optional`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//priority
          // 
          "priority": "optional",

          // Is it an essential (non-removable) package or not.
          // Defaults to `false`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//essential
          // 
          "essential": true,

          // The package's description.
          // Defaults to `//{project.longDescription}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//description
          // 
          "description": "Sample application",

          // The URL of the web site for this package.
          // Defaults to `//{project.links.website}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//homepage
          // 
          "homepage": "https://github.com/duke/app"

          // Additional source packages used to build the binary.
          // https://www.debian.org/doc/debian-policy/ch-relationships.html//s-built-using
          // 
          "builtUsing": "gcc-4.6 (= 4.6.0-11)",

          // Dependencies may be defined as a list of packages
          // https://www.debian.org/doc/debian-policy/ch-relationships.html//s-binarydeps
          // 
          "depends": ["foo"],
          "preDepends": ["bar"],
          "recommends": ["foobar"],
          "suggests": ["foobar"],
          "enhances": ["foofy"],
          "breaks": ["foofoo"],
          "conflicts": ["barbar"]
        },

        // Directory with file templates used to prepare the assembler.
        // Defaults to `src/jreleaser/assemblers/#$#{distribution.name}/deb`.
        // If specified, path must exist.
        // 
        "templateDirectory": "path/to/deb/templates",

        // List of template files to be skipped.
        // Value may be an exact match or a regex.
        // 
        "skipTemplates": [
          "README.md.tpl"
        ],

        // Defines a list of additional files as artifacts.
        // These files will be added to the assembled archive.
        //  
        "artifacts": [
          {
            "path": "path/to/file"
          },
          {
            "path": "path/to/another_file",
            "transform": "path/inside/archive"
          },
          {
            "path": "path/to/platform/specific/file",
            "platform": "osx-x86_64"
          }
        ]  ,

        // Defines a list of additional files as globs.
        // These files will be added to the assembled archive.
        // 
        "files": [
          {
            // The pattern to use.
            // May use glob or regex pattern syntax.
            //  
            "pattern": "path/to/**/*.txt"
          }
        ],

        // 
        "fileSets": [
          {
            // The input directory to copy files from.
            //  
            "input": "path/to/input/directory",

            // The target path inside the archive.
            // If left undefined, defaults to the root of the archive.
            //  
            "output": "path/to/archive/entry",

            // Fail if the given `input` does not exist.
            // Defaults to `true`.
            // 
            "failOnMissingInput": false,

            // A set of files and directory to include.
            //  
            "includes": ["name_or_regex"],

            // A set of files and directory to exclude.
            //  
            "excludes": ["name_or_regex"],

            // Additional properties used when evaluating templates.
            //  
            "extraProperties": {
              // Key will be capitalized and prefixed with `artifact`, i.e, `artifactFoo`.
              "foo": "bar"
            }
          }
        ],

      }
    }
  }
}

<jreleaser>
  <!--
    
  -->
  <assemble>
    <!--
      
    -->
    <deb>
      <!--
        Assemblers require a name.
        
      -->
      <app>
        <!--
          Enables or disables the distribution.
          Supported values are [`NEVER`, `ALWAYS`, `RELEASE`, `SNAPSHOT`].
          Defaults to `ALWAYS`.
           
        -->
        <active>ALWAYS</active>

        <!--
          Export the assembled artifacts as a matching named distribution.
          Defaults to `true`.
          
        -->
        <exported>true</exported>

        <!--
          The stereotype of this assembler.
          Supported values are [`NONE`, `CLI`, `DESKTOP`, `WEB`, `MOBILE`].
          Defaults to `#{project.stereotype}`.
          
        -->
        <stereotype>CLI</stereotype>

        <!--
          Additional properties used when evaluating templates.
           
        -->
        <extraProperties>
          <!--
            Key will be capitalized and prefixed with `deb`, i.e, `debFoo`.
          -->
          <foo>bar</foo>
        </extraProperties>

        <!--
          
        -->
        <platform>

          <!--
            Key value pairs.
            Keys match a full platform or an os.name, os.arch.
            Same rules apply as in Platform.
            
          -->
          <replacements>
            <osx-x86_64>mac</osx-x86_64>
            <aarch_64>aarch64</aarch_64>
            <x86_64>amd64</x86_64>
            <linux_musl>alpine</linux_musl>
          </replacements>
        </platform>

        <!--
          Name of the executable launcher.
          If left undefined, will use `#{assembler.name}`.
          
        -->
        <executable>app</executable>

          Target architexture.
          Valid values as defined by `dpkg-architecture -L` such as `all`, `aamd64`, etc.
          
        <architecture>all</architecture>

          Target path where files will be installed.
           
        <installationPath>/opt/{{packageName}}</installationPath>

          References assembled artifacts from another assembler.
          
        <assemblerRef>app-archive</assemblerRef>

          Defines values for control fields
          See https://www.debian.org/doc/debian-policy/ch-controlfields.html
          
        <control>

            Name of the package.
            Defaults to ` {assembler.name}`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html s-f-package[]
            
          <packageName>ap</packageName>

            Package version.
            Defaults to ` {project.version}`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html s-f-version[]
            
          <packageVersion>1.0.0</packageVersion>

            Package revision.
            Defaults to ` {project.version}`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html s-f-version[]
            
          <packageRevision>1</packageRevision>

            Virtual package name.
            Defaults to ` {assembler.name}`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html package-interrelationship-fields-depends-pre-depends-recommends-suggests-breaks-conflicts-provides-replaces-enhances[]
            
          <provides>app</provides>

            The package maintainer’s name and email address.
            https://www.debian.org/doc/debian-policy/ch-controlfields.html s-f-maintainer[]
            
          <maintainer>Duke &lt;duke@acme.com&gt;</maintainer>

            Specifies an application area into which the package has been classified.
            Defaults to `misc`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html section[]
            
          <section>devel</section>

            How important it is that the user have the package installed.
            Defaults to `optional`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html priority[]
            
          <priority>optional</priority>

            Is it an essential (non-removable) package or not.
            Defaults to `false`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html essential[]
            
          <essential>true</essential>

            The package's description.
            Defaults to ` {project.longDescription}`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html description[]
            
          <description>Sample application</description>

            The URL of the web site for this package.
            Defaults to ` {project.links.website}`.
            link:https://www.debian.org/doc/debian-policy/ch-controlfields.html homepage[]
            
          <homepage>https://github.com/duke/app</homepage>

            Additional source packages used to build the binary.
            link:https://www.debian.org/doc/debian-policy/ch-relationships.html s-built-using[]
            
          <builtUsing>gcc-4.6 (= 4.6.0-11)</builtUsing>

            Dependencies may be defined as a list of packages
            https://www.debian.org/doc/debian-policy/ch-relationships.html s-binarydeps
            
          <depends>
            <dependency>foo</dependency>
          </depends>
          <preDepends>
            <dependency>bar</dependency>
          </preDepends>
          <recommends>
            <dependency>foobar</dependency>
          </recommends>
          <suggests>
            <dependency>foobar</dependency>
          </suggests>
          <enhances>
            <dependency>foofy</dependency>
          </enhances>
          <breaks>
            <dependency>foofoo</dependency>
          </breaks>
          <conflicts>
            <dependency>barbar</dependency>
          </conflicts>
        </control>

        <!--
          Directory with file templates used to prepare the assembler.
          Defaults to `src/jreleaser/assemblers/#{distribution.name}/deb`.
          If specified, path must exist.
          
        -->
        <templateDirectory>path/to/deb/templates</templateDirectory>

        <!--
          List of template files to be skipped.
          Value may be an exact match or a regex.
          
        -->
        <skipTemplates>
          <skipTemplate>README.md.tpl</skipTemplate>
        </skipTemplates>

        <!--
          Defines a list of additional files as artifacts.
          These files will be added to the assembled archive.
           
        -->
        <artifacts>
          <artifact>
            <path>path/to/file</path>
          </artifact>
          <artifact>
            <path>path/to/another_file</path>
            <transform>path/inside/archive</transform>
          </artifact>
          <artifact>
            <path>path/to/platform/specific/file</path>
            <platform>osx-x86_64</platform>
          </artifact>
        </artifacts>

        <!--
          Defines a list of additional files as globs.
          These files will be added to the assembled archive.
          
        -->
        <files>
          <file>
            <!--
              The pattern to use.
              May use glob or regex pattern syntax.
               
            -->
            <pattern>path/to/**/*.txt</pattern>
          </file>
        </files>

        <!--
          
        -->
        <fileSets>
          <fileSet>
            <!--
              The input directory to copy files from.
               
            -->
            <input>path/to/input/directory</input>

            <!--
              The target path inside the archive.
              If left undefined, defaults to the root of the archive.
               
            -->
            <output>path/to/archive/entry</output>

            <!--
              Fail if the given `input` does not exist.
              Defaults to `true`.
              
            -->
            <failOnMissingInput>false</failOnMissingInput>

            <!--
              A set of files and directory to include.
               
            -->
            <includes>
              <include>name_or_regex</include>
            </includes>

            <!--
              A set of files and directory to exclude.
               
            -->
            <excludes>
              <exclude>name_or_regex</exclude>
            </excludes>

            <!--
              Additional properties used when evaluating templates.
              
            -->
            <extraProperties>
              <!--
                Key will be capitalized and prefixed with `artifact`, i.e, `artifactFoo`.
              -->
              <foo>bar</foo>
            </extraProperties>
          </fileSet>
        </fileSets>

      </app>
    </deb>
  </assemble>
</jreleaser>

jreleaser {
  // 
  assemble {
    // 
    deb {
      // Assemblers require a name.
      // 
      app {

        // Enables or disables the assembler.
        // Supported values are [`NEVER`, `ALWAYS`, `RELEASE`, `SNAPSHOT`].
        // Defaults to `NEVER`.
        //  
        active = 'ALWAYS'

        // Export the assembled artifacts as a matching named distribution.
        // Defaults to `true`.
        // 
        exported = true

        // The stereotype of this assembler.
        // Supported values are [`NONE`, `CLI`, `DESKTOP`, `WEB`, `MOBILE`].
        // Defaults to `#{project.stereotype}`.
        // 
        stereotype = 'CLI'

        // Additional properties used when evaluating templates.
        // Key will be capitalized and prefixed with `deb`, i.e, `debFoo`.
        //  
        extraProperties.put('foo', 'bar')

        // 
        platform {

          // Key value pairs.
          // Keys match a full platform or an os.name, os.arch.
          // Same rules apply as in Platform.
          // 
          replacements = [
            'osx-x86_64': 'mac',
            aarch_64: 'aarch64',
            x86_64: 'amd64',
            linux_musl: 'alpine'
          ]
        }

        // Name of the executable launcher.
        // If left undefined, will use `#{assembler.name}`.
        // 
        executable = 'app'

        // Target architexture.
        // Valid values as defined by `dpkg-architecture -L` such as `all`, `aamd64`, etc.
        // 
        architecture = 'all'

        // Target path where files will be installed.
        //  
        installationPath = '/opt/{{packageName}}'

        // References assembled artifacts from another assembler.
        // 
        assemblerRef = 'app-archive'

        // Defines values for control fields
        // See https://www.debian.org/doc/debian-policy/ch-controlfields.html
        // 
        control {

          // Name of the package.
          // Defaults to `//{assembler.name}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-package
          // 
          packageName = "app"

          // Package version.
          // Defaults to `//{project.version}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-version
          // 
          packageVersion = '1.0.0'

          // Package revision.
          // Defaults to `//{project.version}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-version
          // 
          packageRevision = 1

          // Virtual package name.
          // Defaults to `//{assembler.name}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//package-interrelationship-fields-depends-pre-depends-recommends-suggests-breaks-conflicts-provides-replaces-enhances
          // 
          provides = 'app'

          // The package maintainer’s name and email address.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//s-f-maintainer
          // 
          maintainer = 'Duke <duke@acme.com>'

          // Specifies an application area into which the package has been classified.
          // Defaults to `misc`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//section
          // 
          section = 'devel'

          // How important it is that the user have the package installed.
          // Defaults to `optional`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//priority
          // 
          priority = 'optional'

          // Is it an essential (non-removable) package or not.
          // Defaults to `false`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//essential
          // 
          essential = true

          // The package's description.
          // Defaults to `//{project.longDescription}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//description
          // 
          description = 'Sample application'

          // The URL of the web site for this package.
          // Defaults to `//{project.links.website}`.
          // https://www.debian.org/doc/debian-policy/ch-controlfields.html//homepage
          // 
          homepage = 'https://github.com/duke/app'

          // Additional source packages used to build the binary.
          // https://www.debian.org/doc/debian-policy/ch-relationships.html//s-built-using
          // 
          builtUsing = 'gcc-4.6 (= 4.6.0-11)'

          // Dependencies may be defined as a list of packages
          // https://www.debian.org/doc/debian-policy/ch-relationships.html//s-binarydeps
          // 
          depends = ['foo']
          preDepends = ['bar']
          recommends = ['foobar']
          suggests = ['foobar']
          enhances = ['foofy']
          breaks = ['foofoo']
          conflicts = ['barbar']
        }

        // Directory with file templates used to prepare the assembler.
        // Defaults to `src/jreleaser/assemblers/#{distribution.name}/deb`.
        // If specified, path must exist.
        // 
        templateDirectory = 'path/to/deb/templates'

        // List of template files to be skipped.
        // Value may be an exact match or a regex.
        // 
        skipTemplate('README.md.tpl')

        // Defines a list of additional files as artifacts.
        // These files will be added to the assembled archive.
        //  
        artifact {
          path = 'path/to/file'
        }
        artifact {
          path = 'path/to/another_file'
          transform = 'path/inside/archive'
        }
        artifact {
          path = 'path/to/platform/specific/file'
          platform = 'osx-x86_64'
        }

        // Defines a list of additional files as globs.
        // These files will be added to the assembled archive.
        // 
        files {
          // The pattern to use.
          // May use glob or regex pattern syntax.
          //  
          pattern = 'path/to/**/*.txt'
        }

        // 
        fileSet {
          // The input directory to copy files from.
          //  
          input = 'path/to/input/directory'

          // The target path inside the archive.
          // If left undefined, defaults to the root of the archive.
          //  
          output = 'path/to/archive/entry'

          // Fail if the given `input` does not exist.
          // Defaults to `true`.
          // 
          failOnMissingInput = false

          // A set of files and directory to include.
          //  
          includes = ['name_or_regex']

          // A set of files and directory to exclude.
          //  
          excludes = ['name_or_regex']

          // Additional properties used when evaluating templates.
          // Key will be capitalized and prefixed with `artifact`, i.e, `artifactFoo`.
          //  
          extraProperties.put('foo', 'bar')
        }

      }
    }
  }
}

project:
  version: 1.0.0
  name: app
  description: Sample application
  authors:
    - Duke
  inceptionYear: 2020

assemble:
  deb:
    app:
      active: ALWAYS
      architecture: amd64
      control:
        maintainer: Duke <duke@acme.com>
      fileSets:
        - input: '.'
          includes:
            - 'LICENSE'
            - 'README'
        - input: 'target/release'
          output: 'bin'
          includes: [ 'app' ]

[project]
  version = "1.0.0"
  name = "app"
  description = "Sample application"
  authors = [ "Duke" ]
  inceptionYear = "2020"

[assemble.archive.app]
  active = "ALWAYS"
  architecture = "amd64"
  control.maintainer = "Duke <duke@acme.com>"
  [[assemble.archive.app.fileSets]]
    input = "."
    includes = ["LICENSE", "README"]
  [[assemble.archive.app.fileSets]]
    input = "target/release"
    output = "bin"
    includes = [ "app" ]

{
  "project": {
    "version": "1.0.0",
    "name": "app",
    "description": "Sample application",
    "authors": [ "Duke" ],
    "inceptionYear": "2020"
  },
  "assemble": {
    "archive": {
      "app": {
        "active": "ALWAYS",
        "architexture": "amd64",
        "control": {
          "maintainer": "Duke <duke@acme.com>"
        },
        "fileSets": [
          {
            "input": ".",
            "includes": ["LICENSE", "README"]
          },
          {
            "input": "target/release",
            "output": "bin",
            "includes": [ "app" ]
          }
        ]
      }
    }
  }
}

<jreleaser>
  <project>
    <version>1.0.0</version>
    <name>app</name>
    <description>Sample application</description>
    <authors>Duke</authors>
    <inceptionYear>2020</inceptionYear>
  </project>
  <assemble>
    <archive>
      <app>
        <active>ALWAYS</active>
        <architexture>amd64</architecture>
        <control>
          <maintainer>Duke &lt;duke@acme.com&gt;</maintainer>
        </control>
        <fileSets>
          <fileSet>
            <input>.</input>
            <includes>
              <include>LICENSE</include>
              <include>README</include>
            </includes>
          </fileSet>
          <fileSet>
            <input>target/release</input>
            <output>bin</output>
            <includes>
              <include>app</include>
            </includes>
          </fileSet>
        </fileSets>
      </app>
    </archive>
  </assemble>
</jreleaser>

jreleaser {
  project {
    version = '1.0.0'
    name = 'app'
    description = 'Sample application'
    author('Duke')
    inceptionYear: '2020'
  }
  assemble {
    archive {
      app {
        active = 'ALWAYS'
        architecture = 'amd64'
        control {
          maintainer = 'Duke <duke@acme.com>'
        }
        fileSet {
          input = '.'
          includes = ['LICENSE', 'README']
        }
        fileSet {
          input = 'target/release'
          output = 'bin'
          includes = [ 'app' ]
        }
      }
    }
  }
}